84 Fr 50 pgs. 9261-9273 – energy labeling rule electricity formulas physics

##############

2 ?42 U.S.C. 6294. EPCA also requires the Department of Energy (DOE) to develop z gas tecate telefono test procedures that measure how much energy appliances use, and to determine the representative average cost a consumer pays for different types of energy. [top] The Rule requires manufacturers to attach yellow EnergyGuide labels to many of the covered products and prohibits retailers from removing these labels or rendering them illegible. In addition, it directs sellers, including retailers, to post label information on websites and in paper catalogs from which consumers can order products. EnergyGuide labels for most covered products contain three key disclosures: e\Estimated annual energy cost, a product’s energy consumption or energy efficiency rating as determined by DOE test procedures, and a comparability electricity song 2015 range displaying the highest and lowest energy costs or efficiency ratings for all similar models. The Rule requires marketers to use national average costs for applicable energy sources ( e.g., electricity, natural gas, oil) as calculated by DOE in all cost calculations. Under the Rule, the Commission periodically updates comparability range and annual energy cost information based on manufacturer data submitted pursuant to the Rule’s reporting requirements. 3

Because your comment will be placed on the publicly accessible FTC website at www.ftc.gov, you are solely responsible for making sure that your comment does not include any sensitive or confidential information. In particular, your comment should not include gas monkey monster truck body any sensitive personal information, such as your or anyone else’s Social Security number; date of birth; driver’s license number or other state identification number, or foreign country equivalent; passport number; financial account number; or credit or debit card number. You are also solely responsible for making sure that your comment electricity and magnetism review game does not include any sensitive health information, such as medical records or other individually identifiable health information. In addition, your comment should not include any trade secret or any commercial or financial information which is . . . privileged or confidential-as provided by section 6(f) of the FTC Act, 15 U.S.C. 46(f), and FTC Rule 4.10(a)(2), 16 CFR 4.10(a)(2)-including in particular competitively sensitive information such as costs, sales statistics, inventories, formulas, patterns, devices, manufacturing processes, or customer names. [top] Comments containing material for which confidential treatment is requested must be filed in paper form, must be clearly labeled Confidential, and must comply with FTC Rule 4.9(c). In particular, the electricity outage written request for confidential treatment that accompanies the comment must include the factual and legal basis for the request, and must identify the specific portions of the comment to be withheld from the public record. See FTC Rule 4.9(c). Your comment will be kept confidential only if the FTC General Counsel grants your request in accordance with the law and the public interest. Once your comment has been posted on the public FTC website-as legally required by FTC Rule 4.9(b)-we cannot redact or remove your comment from the FTC website gas number, unless you submit a confidentiality request that meets the requirements for such treatment under FTC Rule 4.9(c), and the General Counsel grants that request.

The provisions of the Regulatory Flexibility Act relating to a Regulatory Flexibility Act analysis (5 U.S.C. 603-604) are not applicable to this proceeding because the proposed amendments do not impose any new or different obligations on entities regulated by the Energy Labeling Rule. As explained elsewhere in this document, the proposed amendments do not change the substance or frequency of the recordkeeping, disclosure, or reporting requirements. Thus, the amendments will not have a significant economic impact on a substantial number of small entities. 5 U.S.C. 605. The Commission has therefore concluded that a regulatory flexibility analysis is not necessary, and certifies, under section 605 of the Regulatory Flexibility Act (5 U.S.C. 605(b)), that the proposed amendments will not have a significant electricity transmission vs distribution economic impact on a substantial number of small entities. This rulemaking document constitutes notice of the above certification and statement dynamic electricity examples to the Small Business Administration required under 5 U.S.C. 605(b).

(a) Refrigerators and refrigerator-freezers. (1) Electric refrigerator means a cabinet designed for the refrigerated storage of food, designed to be capable of achieving storage temperatures above 32?°F (0 °C) and below 39?°F (3.9 °C), and having a source of refrigeration requiring single phase, alternating current electric energy input only. An electric refrigerator may include a compartment for the freezing and storage of food at temperatures below 32?°F (0 °C), but does not provide a separate low temperature compartment designed for the freezing and storage of food at temperatures below 8?°F (-13.3 °C). [top] (2) Electric refrigerator-freezer means a cabinet which consists of two or more compartments with at least one of the compartments designed for the refrigerated storage of food and designed to be capable of achieving storage temperatures above 32?°F (0 °C) and below 39?°F (3.9 °C), and with at least one of the compartments designed for gas dryer vs electric dryer hookups the freezing and storage of food at temperatures below 8?°F (-13.3 °C) which may be adjusted by the user to a temperature of 0?°F (-17.8 °C) or below. The source of refrigeration requires single phase, alternating current electric energy input only.

(5) Manufacturers must submit a website address for the online EnergyGuide labels covered by §?305.9 in new model and annual reports required by this section. Manufacturers may accomplish this by either submitting a specific link to a URL for each label, a link to a PDF download for each label, or a link to a website that takes users directly to a searchable database of the covered labels from which the label image or download may be accessed using the model number as certified electricity transformer near house to DOE pursuant to 10 CFR part 429 and the model number advertised in product literature. Such label information must be submitted either at the gas dryer vs electric dryer singapore time the model is certified to DOE pursuant to 10 CFR part 429 or at some time on or before the annual report date immediately following such certification. In lieu of submitting the required information to the Commission, manufacturers may submit such information to the Department of Energy via the CCMS at https://regulations.doe.gov/ccms as provided by 10 CFR 429.12. The requirements in this paragraph do not apply to Lighting Facts labels.

(b) Layout. Energy labels shall use one size, similar colors, and typefaces with consistent positioning of headline, copy, and charts to maintain uniformity for immediate consumer recognition and readability. Trim size dimensions for the labels shall be as follows: Width must be between 5 1⁄ 4 inches and 5 1⁄ 2 inches (13.34 cm. and 13.97 cm.); length must be between 7 3⁄ 8 inches (18.73 cm.) and 7 5⁄ 8 (19.37 cm.). Copy is to be set between 27 picas and 29 picas and copy page should be centered (right to left and top to bottom). Depth is variable grade 6 electricity but should follow closely the prototype and sample labels appearing at the end of this part illustrating the basic layout. All positioning, spacing, type sizes, and line widths should be similar to and consistent with the prototype and sample labels in appendix L to this part. [top] (c) Type style and setting. The Arial series typeface or equivalent shall be used exclusively on the label. Specific sizes and faces to be used are indicated on the prototype labels. No hyphenation should be used in setting headline or copy text. Positioning and spacing should follow the prototypes closely. Generally, text must be set flush left with two physical science electricity review worksheet points leading except where otherwise indicated. See the prototype labels for specific directions.

Although deregulating energy labeling pales in comparison to Kahn’s comprehensive deregulation of the airline industry, the same principle-to leave firms room to experiment within the bounds set by applicable law-applies here. For example, a manufacturer with particularly impressive energy conservation statistics might wish to trumpet that achievement with a larger and more detailed graphic. A manufacturer with less impressive statistics must of course satisfy its baseline labeling obligations. Surely, we as a Commission can provide guidance on labeling requirements without dictating minutia involving the type electricity flow direction of paper and adhesive employed. [top] In short, I support fulfilling the statutory mandate that Congress has imposed, but cannot vote to issue the Rule in its present form. As it stands, the Rule is laden 2015 electricity prices with many additional commandments that go far beyond what is necessary to fulfill our obligation under the relevant statute. Although the Commission long ago abandoned some of the most egregious instances of invasive regulatory zeal that earned it the sobriquet of the second most powerful legislature in Washington,? 6 forswearing new mistakes is not enough. We must also revisit and pare back existing regulatory excesses, including some of the requirements contained in this rule.