Attic radiant barrier doesn’t work “srx does” – alternative energy, llc gas calculator

##########

Our SuperReflex (Best Radiant Barrier Reflective Insulation Product On The Market) actually puts traditional radiant barrier technology to shame! It’s actually surprising that someone else didn’t create this product already. It’s a very simple design that solves all of the common problems with current radiant barrier technology: Dust, Moisture and Not enough energy savings to put money back in your pocket. What Is SRX & How Does It Compare To Radiant Barrier?

Not only did The University Of Australia prove that our radiant barrier product has the lowest emissivity rating in the world (emissivity rating of 0.2) but our radiant barrier alternative insulation never loses its emissivity to dust – The most common problem with current technology. We solved that problem years ago and are still investigating ways to make it even more effective. static electricity definition science Radiant Barrier Compared To SRX Cost Savings

Why spend all that money and be left with nothing to show for it after several years? SRX keeps working no matter how much dust is present. Areas like Phoenix, Arizona receive a generous amount of dust every year, leaving home owners who install radiant barrier confused as to why they even got it installed in the first place. We believe in our product so much it comes with an unconditional money back guarantee if it doesn’t give you the kinds of savings we are clearly stating.

Low emitting Infrared surfaces are rated on something called an “E” Rating. Unlike the insulation in your home is likely thick batting which is rated with an R Value. E Rating measures surfaces that are able to keep their cool under heat. These surfaces are much better for “insulation” because they are simply deflecting or containing the radiant heat much like a thermos bottle does.

For example: If a surface of something had an “E” Rating of 0.00, that would mean that surface was so reflective that heat has no effect on that surface at all. Of course, very few things in this world can make the list of having the lowest “E” Rating. The Graph below shows surfaces that have an “E” Rating and where each product ranks according to how low their E rating is. This graph clearly shows that SRX has a lower E rating than any material on the planet, much less radiant barrier. gas 101 SRX Has The Lowest E Rating In The World

Radiant barrier isn’t even in the same ball park as SRX. You’re better off installing aluminum foil vs installing current radiant barrier insulation. As you can see in the E rating graph above, SRX has the lowest E rating of any material on the planet – meaning, it can reflect more heat than any other material or radiant barrier product in the world!

First of all, not all products are created equal, if you think so, then you might want to just staple some tin foil in your attic because that is actually better than some of the leading radiant barrier type products. Using a Thermal control membrane radiant barrier like this one LINK which has the lowest emissivity rating of any material, 0.02, rivaling only highly polished silver. Every other product has a rating of 0.25 or greater. See graph below to clarify.

Third, this is the most time consuming and most expensive way to install a radiant barrier, taking up to two weeks in some installations. It usually takes less than one day to install SuperReflex. Clearly you will spend more to have a group of installers at your home for 2 weeks in your attic multiplying the risk to your home and your wallet, versus a 1 day SRX install.

TRUTH: There can only be one. Thermal control Membrane, the best radiant barrier product available, Is the only one in the industry that has a dust proof design. This myth is absolutely true, for all other Radiant Barrier products. However, The patented dual-mesh design of SRX allows you to simply lay out the barrier between the studs without using staples or glue The top layer acts as a sacrificial layer which will accumulate dust over time, however, just like a thermos bottle needs space, this material has a mesh layer and then a secondary layer of the same durable lightweight material. In this application with this patented design, this product is guaranteed performance forever with no affect by dust whatsoever.

TRUTH: There is some truth to this myth. An attic does require some kind of venting solution when you install a radiant barrier. In more extreme climates like the desert, just having vents on your roof isn’t doing anything for the radiant heat trapped in your attic. gas tax rates by state Having a proper fan/vent solution is actually a very important part of radiant barrier installations that frequently gets overlooked.

Installing a proper venting solution for your home is an absolute must in hot climates and will be different for everyone because of the different types of homes. Most homes in Phoenix, Arizona have only a few types of roofs, making a proper venting solution much easier and more modular. You must have at least one or two attic fans that are on a temperature triggered automatic switch. The fans must be on a specific side of your home in order to maximize venting (pulling cool air from the north side means you have to put your fan blowing out the south side and have some good vent holes on the north side to pull from. After a fan venting system is installed properly, all other holes like whirly birds and other vents and soffit vents must be covered up in order to contain the air flow in the desired direction of travel.

TRUTH: False claims again on this myth. When talking about cold climates and containing the heat in your homes there are not very many radiant barrier products in this market yet. This is because of the moisture in colder climates. Radiant barriers can trap moisture in your attic because they don’t have any way to regulate the moisture. However, there is a highly reflective perforated radiant barrier specifically designed and tested on cold climates. The perforations insure that moisture emitting from the house will not condense below the membrane.

Keep your heat in during the winter and out during the summer with this extremely innovative attic insulation product: This also eliminates ice dams! When you stop the heat from the house melting the snow on the roof ice dams cannot form. gas stoichiometry worksheet answers Simply roll this membrane out over your existing attic insulation to prevent ice dams, keep heat in and make every room in the house the same temperature. Oh, ya, and did I mention the manufacturer claims of dropping your heating bill by at least 30%. Don’t believe me? Check it out here.

TRUTH: YES, of course. You can go to the hardware store and buy a reflective barrier off a roll and put it in yourself. You may want to consider having it installed by professionals and done properly. pass gas in spanish This is a product that could potentially cause house fires if installed incorrectly, especially if you have gas appliances or recessed “can lights” at home. Not all radiant barriers are created equal. Most claims by radiant barrier companies clock in at around 10% savings just on you’re A/C cost in summer time. That is not worth me getting out of bed in the morning to talk to one of these companies, sorry. That being said, there is a product that when installed correctly with a proper venting solution can reach entire power bill savings of more than 30% some up to 50%. Did that wake you up? I will get out of bed for those savings, especially living in Arizona where the homes are all grossly inefficient by design. electricity quiz 4th grade This product is the longest standing radiant barrier product on the market touting more than a 25 year lifespan.

I will tell you why. Have you seen your insulation in your walls and in your attic? It is a thick “cotton fluff” material. What does that matter? Well, If you live in a hot desert like Phoenix, AZ you may want to consider this question. What do you think would happen if you wore a thick sweater in the middle of summer? That is how your house is designed; it has a thick sweater on it that keeps the heat in the walls and ceiling long after the sun goes down.

The building codes all come from the East coast where the homes are designed to keep the heat in. They just decided to throw a huge AC unit on the home now to keep it cooler. By a massive oversight this metal box gets connected to a 150 degrees metal elbow that goes directly on top of your roof that gets up to 200 degrees in summer. This air handling is now system struggling to distribute cold air through your 180 degree attic.

THE BIG TRUTH: This is False! Pretty much all radiant barrier products today are not being installed with proper attic venting and fan solution packages for one, which dramatically reduces the effects of radiant barrier. Imagine a highly reflective product just under your roof with no way to escape, that is called a solar oven. There are testimonies of people who experienced higher cooling cost after radiant barrier systems. Some folks experience temporary savings until the summer time or until the product collects too much dust to be effective. There is one that will save you anywhere from 20-50% on your power cost to run your home in extreme climates like Arizona. You can get a 3 year return on your investment, with an option to finance for no money down and you can get up to a 30% discount on the cost. You may have guessed it, but yes, once again, the best all-around reflective radiant barrier available today. It has been around the longest and it is of course the SuperReflex, “The best radiant barrier” Comes through yet again:

SuperReflex (SRX), is the only available dust proof thermal radiant barrier. SRX Radiant Barrier is an extremely effective way to increase comfort, reduce consumption and keep rising energy bills in check. SRX was chosen to be installed on ABC’s Extreme Home Makeover for the Yazee family in Pinion Arizona. SRX has allowed multiple architects to win awards for the efficiency of their projects.

By pre-cooling a home (in hot climates) and shutting off the a/c when expensive on peak hours start, significant reductions in energy costs can be obtained. Conventional insulation cannot stop the influx of heat during on peak hours and by 3pm the attic heat has reached the ceiling. SRX keeps the insulation much cooler which allows the a/c system to be turned off and “coast” until Off Peak times starts (typically 7pm or 8pm). electricity number Major Demand Reduction