Chp station burns around 90,000 tonnes of biomass _ engineer live

After a construction period of 18 months, operation has begun on a modern German, biomass-fired combined heating and power station. Power quiz questions Every year, the giant heating boiler burns around 90,000 tonnes of biomass in the form of old and used wood at temperatures of up to 1100°C.

Following an undertaking by a large German city to reduce overall energy consumption by 20% by the year 2020 (relative to 1990) and increase the proportion of renewable energies in the same period by 20% of energy consumed (primary energy), a recently commissioned combined heat and power station represents a milestone in the achievement of this climate protection goal.

After a three-and-a-half-year planning and approval phase, the diggers moved in at the end of April 2012, and September of the same year saw the celebration of the laying of the station’s foundation stones. Electricity and magnetism physics After a successful boiler pressure test by TUV, the boiler was given the stamp of approval at the beginning of March 2013, and after a building time of just 18 months, the station officially began operation in December 2013.

The fully enclosed fuel storage hall, with a surface area of 1,944 m2 and a height of 13.5m, provides a storage volume of 6500m3 and holds 1300 tonnes of fuel, enough for around 3.5 days or 84 hours. X men electricity mutant The external fuel preparation site is just 300m away. Z gas el salvador precios The boiler house stands on a base plate of 900m3 concrete, has a surface area of 866m2 and a height of between 18.8m (low part) and 28.6m (high part). Gas pains or contractions The boiler house contains 200 tonnes of steel, and the 280 tonne boiler support structure holds the 730 tonne boiler. B games basketball Immediately next to the boiler house is the complex flue gas cleaning plant with a 46m high stack.

Every year, the station will produce around 55 million kWh of electricity and around 154 million kWh of district heat from the 90,000 tonnes of biomass. Gas jet size chart This corresponds to around 4% of the city’s current power and heat requirements, and could theoretically supply 12,000 homes. Electricity deregulation map This makes the combined station the largest single project to date in the achievement of this large city’s energy and climate protection goals.

The new station achieves one-fifth of the city’s climate protection goal of raising the proportion of renewable energies to 20% by the year 2020. J gastrointest surg Combustion of biomass as a renewable resource leads to a CO2 saving of around 94.7 million kg per year.

The majority of the waste wood comes from bulky refuse collections. Electricity jokes puns The comminuted material, free from coarse impurities, is transported by truck to the station’s fuel storage hall, where it is deposited in storage containers. Grade 6 science electricity test The fuel is then conveyed by wheeled loaders to push-feed floor units, from where it is automatically transported to metering and storage containers in the boiler house for supply to the furnace.

Via an automatic feed, the fuel reaches the technical heart of the station – the furnace chamber – where it is burned at temperatures of 950-1100°C on a multizone, air-cooled feeder grate with automatic intake. A level physics electricity questions and answers The combustion heat output is around 46 MW. Natural electricity examples At this point, the nitrous oxides are already largely removed from the flue gases, primarily via flue gas recirculation and secondarily by urea addition. Electricity lesson plans 4th grade The hot flue gases now flow though the boiler passes to generate steam, and are then freed from further contaminants in a complex flue gas cleaning plant. Wd gaster Emissions from the station comply with the strict limits of the 17th Federal Emissions Protection Law (BImSchV).

The hot steam generated by combustion of the biomass is extracted from the boiler and supplied to the turbines. Z gastroenterol journal The mechanical rotary motion produced in the turbine is converted by an alternator into electrical power, which is then transformed up to medium voltage (20 kV) in an in-house transformer. Gas house dance hall A 2km cable feeds the resulting CO2-neutral power from renewable energy into the power network.

When the power station is not producing electricity, it is supplied with power via the infeed cable. B games unblocked An uninterruptible power supply (UPS) and substitute generator ensure that, even on failure of the public power network, the station can be transferred into a safe operating state.

After the high pressure steam has been reduced to a lower pressure in the turbine, it is supplied to the heating condenser, which brings the heating water for district heating to temperature. Gas tax in ct An underground, heat-insulated pipe system feeds this heating water into the district heating connection network.

The heat is delivered to the consumer via a heat exchanger in the form of a transfer station. Electricity in costa rica for travelers The operating temperatures for output are 70-100°C at an operating pressure of 10-15bar.

The combined heat and power station is monitored via the PMSXpro process control system from ME-Automation Projects, based in Fuldabrück, who completed the project in just 10 months. Electricity word search answers Guaranteed high reliability is essential, and this is ensured by the PMSXpro process control system, using fully duplicated automation stations and also duplicated process servers for total redundancy.

The duplicated automation stations are Mitsubishi Electric control units from the MELSEC System Q series, which ensure safe automation of process procedures and monitor the fuel store, combustion and boiler, through to the flue gas cleaning. Gas laws worksheet chapter 5 answers The control system components communicate with each other via an error-tolerant FO network. Gas in oil causes This control system network is connected via an application server to the office network, so authorised users in the office have access to the PMSXpro process control system via a secure connection. Electricity projects in pakistan For remote service, two internet access points (DSL and UMTS) with tunnelled VPN connections are available

* The network cabinets and distribution racks, their construction and the associated electrical installation of the LV system and entire control system network.

* The control system components, consisting of control and monitoring stations, process servers, archive servers, application server and engineering stations, and all automation stations with a total of over 6000 inputs and outputs. Gas constant in kj All automation stations are coupled together via a separate FO network and each has a Profibus Master for connection of further Profibus units.

* Complete programming of the automation stations (including safety control systems) and control system components for all process-technical structures.

* The PMSXpro process control system, certified to VGB R 170 A, B and C, from ME-Automation Projects ensures 99.9% utilisation in the Wiesbaden combined heat and power station, which equates to 364 days and 15 hours per year.