Ecosolargy electricity in india first time

##########

A.PTC refers to PVUSA Test Conditions, which were developed to test and compare PV systems as part of the PVUSA (Photovoltaic for Utility Scale Applications) project. PTC are 1,000 watts per square meter solar irradiance, 20° C air temperature, and wind speed of 1 meter per second at 10 meters above ground level. PV manufacturers use Standard Test Conditions (STC) to rate their PV products. STC are 1,000 watts per square meter solar irradiance, 25° C cell temperature, air mass equal to 1.5, and ASTM G173-03 standard spectrum. The PTC rating, which is lower than the STC rating, is generally recognized as a more realistic measure of PV output because the test conditions better reflect "real-world" solar and climatic conditions, compared to the STC rating. PTC ratings are DC (direct current) watts.

Module operating temperature increases relative to air temperature when placed in the sun. As the operating temperature increases, the power output decreases (due to the properties of the conversion material – this is true for all solar modules). PTC ratings take this into consideration to a limited degree by calculating the PTC ratings based in part on the specific module characteristic for output vs. temperature (the temperature coefficients). The PTC ratings are different for each module, and typically vary from approximately 87%-92% of the STC rating. A typical decrease in power output is approximately 12% for crystalline-based solar modules. This decreases results in an STC rated 170 watt DC crystalline solar module being PTC rated at approximately 149 Watts DC.

On the state level, incentives are available that reduce the cost of the system, reduce the tax burden of the solar customer and more. For a clearinghouse of all incentives available from the federal government and the states, go to the Database of State Incentives for Renewables and Efficiency (DSIRE). Your solar installer company will work with your business to ensure maximization of financial incentives.

Every location on earth has a different amount of sunlight exposure throughout the year. gas 93 For example, a northern U.S. city like Boston, MA will have a lower annual average insolation than a desert city like Phoenix, AZ because of climatic differences such as precipitation, fog, humidity and sky condition and distance from the equator. Since solar modules produce power, and resulting energy, when exposed to sunlight, the more insolation a location receives, the more energy will be produced from a module installed at that location.

Recorded insolation data for particular locations is used to help approximate the energy produced by a module, as it is the energy from the sun that is converted to energy from the solar module. The amount of insolation for one particular location differs from day to day. There are multiple insolation data sources that slightly differ from one another. The U.S. Department of Energy and NASA have recorded this data for over 30 years and have calculated insolation data for many locations, which helps predict approximate yearly energy output for that location. One list of insolation data can be downloaded for specific locations, click here.

PV manufacturers use Standard Test Conditions, or STC, to measure their PV products. STC are 1,000 watts per square meter solar irradiance, 25° C cell temperature, air mass equal to 1.5, and ASTM G173-03 standard spectrum. These standardized conditions are used as a baseline reference for measuring the electrical characteristics of a photovoltaic module.

A.ecoSolargy’s modules are designed for long life and require very little maintenance. If the angle of the PV module is 5 degrees or more, normal rainfall is usually sufficient to keep the module glass surface clean under most weather conditions. If dirt build-up becomes excessive, clean the glass surface only with a soft cloth using water. If cleaning the back of the module is required, take utmost care not to damage the back side materials. In order to ensure proper operation of the system, please check all wiring connections and the condition of the wire insulation periodically.

A.Modules should be mounted in accordance with the ecoSolargy installation manual that is specific to the module model. Mounting system may be mounted using either the bolt hole on the frame of the module or with a top clamping method (see installation manual). Please note that if using a top clamping method, one must clamp on the long edge of the module in the appropriate location.

A.ecoSolargy does not test for damage due to hail impact. ecoSolargy’s modules for sale in the USA are UL listed (listed to UL 1703). As part of the listing process, the modules are subjected to a series of tests performed by a Nationally Recognized Testing Laboratory. One of these tests, the impact test, involves dropping a 2” diameter steel ball weighing 1.18 lbs from a height of 51 inches onto the glass surface of the module and seeing if there is sufficient damage to create a safety hazard.

A.ecoSolargy’s crystalline modules are approved for a maximum load of 2,400 PA (50 psf). The process of translating the module maximum load rating into a maximum wind speed rating is site specific and involves multiple variables such as the location’s basic wind speed, exposure category, installation height above ground, etc. electricity manipulation In general, a specialist engineer is needed to convert wind speed into an accurate mechanical load for a specific installation. To determine your local wind speed requirements, please contact your local authority having jurisdiction. The American Society of Civil Engineers (ASCE) Standard 7-05 provides a detailed explanation of how to calculate the minimum design wind load for buildings and other structures.

A.ecoSolargy’s modules for sale in the USA and Canada are either listed to Underwriters Laboratories (UL) Standard 1703 for flat plate PV modules or the International Electrotechnical Commission (IEC) Standard 61646. UL 1703 is a safety standard for flat-plate photovoltaic modules. The following website lists the tests conducted for UL 1703 certification.

Bypass diodes are connected in parallel with groups of solar cells to mitigate the effects of a reverse bias condition within the module. Reverse bias is the condition of a device operating at negative (reverse) voltage. A module with cells in reverse bias will continue to pass current, but since the voltage is negative, the module will dissipate power through the cells that are in reverse bias, thereby reducing the amount of output power from the module. Power that is dissipated through the reverse bias cells can cause the cells to heat up. If this condition were to continue, there could be permanent damage to the module. Bypass diodes offer the alternative by allowing current to bypass groups of cells when cells in the circuit are in reverse bias; thereby eliminating the heat buildup and in essence, protecting the module. Bypass diodes allow the rest of the series-connected cells in the source circuit to continue to deliver power, but the source circuit will operate at a lower voltage. z gas guatemala When the reverse bias condition stops, the diode no longer allows a bypass for current and the full output of the module is restored. The bypass diodes are located in the module’s junction box and are not user serviceable.

A.Many of ecoSolargy’s modules are compatible with microinverters. Please contact the microinverter and manufacturer directly for specifications for the microinverter; compare the module’s output specifications and the inverter input specifications, adjusting for the environmental conditions expected at the site to determine compatibility. ecoSolargy does not endorse or approve any specific microinverter products.

ecoSolargy offers more than one way to go solar. A solar system can be installed on many types of rooftops, on the ground, or over a parking lot. With so many options to choose from, you and your ecoSolargy certified installer will decide what’s right for your business by analyzing your site to determine the best system solution. Please review ecoSolargy commercial case studies to understand how other savvy enterprises put solar to work in their businesses.

On the state level, incentives are available that reduce the cost of the system, reduce the tax burden on the solar customer and more. For a clearinghouse of all incentives available from the federal government and the states, go to the Database of State Incentives for Renewables and Efficiency (DSIRE). Your solar installer company will work with your business to ensure maximization of financial incentives.

• Next, your installer will provide a detailed proposal laying out the system and financials that maximize your solar energy output and savings. Many installers can consult or provide financing options through national or local institutions. gas gangrene Additionally, your installer will ensure your business is able to maximize rebate and tax incentives.

The cost of a system depends on a wide variety of factors including the type of roof, system complexity, geographic location, system size and more. The federal government and several state governments offer generous rebates for purchasers of solar systems. A solar system is an investment that guarantees the cost of electricity for years to come. After the system is purchased, the electricity it generates is essentially free. An ecoSolargy certified installer will analyze your specific electric usage, electricity rate schedule and site to determine what option is the best investment and will produce the highest returns.

The size of your system depends on several factors including your company’s regular electricity use, space availability for a system and financial preferences. Solar systems can either offset 100% or only a portion of a building’s energy requirements. In most situations, your system will be connected to the utility grid, so even if your solar electric system doesn’t generate all of your building’s electricity, you can still draw from the utility.

Please go to http://www.ecosolargy.com/quote-request or for more information call ecoSolargy at 1-877-808-4213 and we will have an ecoSolargy certified installer contact you. Our strong network of more than 200 installers and service sites throughout the U.S. ensures that there is a solar expert close to you, ready to come to your business to determine your energy needs with a free consultation. All you have to do is contact us. We’ll do the rest.

From our roots as a solar (PV) manufacturer, we have grown into a comprehensive solar solutions provider. We serve as an all-inclusive renewable resource for planning, financing, building, and maintaining solar energy power systems. ecoSolargy has focused on being at the leading edge of solutions for the solar industry. ecoSolargy provides high quality solar power products to power homes and businesses around the world. This means you have an experienced solar partner you can trust.

ecoSolargy’s industry leadership, quality manufacturing and extensive network of certified installers make converting your business to solar power easier and more feasible than you may have imagined. Our nationwide installer network ensures that there is a solar expert close to you, ready to come to your business to determine your energy needs with a free consultation.

We offer a 25-year limited warranty on power output for all modules. ecoSolargy warrants material defects and workmanship for 10 years from the date of purchase. We also warrant power output for 25 years from the date of purchase. ecoSolargy has led the industry pushing the standard solar warranty to progress and cover its products production throughout the entire 25 years.

Typically most commercial solar systems are connected to the utility grid through a meter. This meter tracks the amount of electricity your company’s solar electric system produces and the amount of electricity your building consumes. During sunny days (peak production period) your system may produce more power than your building uses, and your electric meter runs backward as you send electricity back to the utility grid. At night, when your system isn’t producing electricity, you will draw energy from the grid. This process is called net metering. At the end of the month, the utility company will only bill your company if it used more electricity than your system produced.

Please visit http://www.ecosolargy.com/contact-us and we will direct you to your best options for purchasing a complete turnkey ecoSolution. Or call ecoSolargy at 1-877-808-4213 and we will walk you through each step to “Turn On Solar.” Our strong network of more than 200 installers and service sites throughout the United States ensures that there is a solar expert close to you, ready to come to your company to determine your energy needs with a free consultation.

Several states, like California, offer higher cash rebates to non-profit and governmental organizations. Some local and state agencies can apply for a variety of loan options with low or no interest. Finally, a Power Purchase Agreement (third-party financing) is another vehicle for different organizations. gas zauberberg Check with your ecoSolargy certified installer to learn more about financing options specifically for your industry or business.

Several monitoring systems are available that can track your system’s energy output and can produce daily, weekly, monthly and annual data. Your ecoSolargy certified installer will work with you to determine which monitoring system best meets your requirements. Check with your installer to see if they offer a monitoring maintenance service. Service agreements can include cleaning and performance monitoring.

Occasionally, a solar array should be rinsed off with a hose to clear the dust or debris that blocks sunlight and reduces efficiency. That’s about all that’s required. There are no moving parts to wear out and ecoSolargy solar modules are covered under limited power output warranty for 25 years. In fact, there are solar modules installed 40 years ago that are still producing energy today. Check with your installer to see if they offer a maintenance service. Service agreements can include cleaning and performance monitoring.