Glossary 7 cases movie

A road or pedestrian level crossing where warning equipment warns road users and pedestrians about approaching rail traffic by devices such as flashing lights or barriers. Equipment used in Rail Vehicle Detection Territory to detect the presence of rail vehicles by counting the number of axles entering or leaving a location. M gasbuddy app They may be used to operate signalling or other infrastructure equipment. A facility or device used by a Competent Worker to prevent either the unintended issue of an Proceed Authority, or the operation of points or signalling equipment.

When given by an inner Handsignaller protecting a worksite, and unless otherwise advised by that Handsignaller, a maximum speed of 25km/h applies until the rail traffic has passed the worksite limits. The track, track formation and drainage, and fixed structures beside, over or under the track. B games zombie The term includes supports for overhead electric traction equipment and supports for signalling and telecommunications equipment, but not the equipment itself. A signal, placed near another signal that might be temporarily obscured from a rail traffic crew’s view, to provide information about the obscured signal’s indication.

An area where interlockings controlled by one signalling location have intervening permissive signals. Npower electricity power cut The area is defined exclusively by a YARD LIMIT (YL) sign and an END OF YARD LIMIT (EYL) sign.

Controlled speed is a speed that allows rail traffic to stop short of an obstruction within half the distance of clear line that is visible ahead. May consist of single or double ended portion of track, to hold rail traffic, connected to a main line that is used to permit other rail traffic to cross or pass. A running line in single-line territory, with entry and exit ends connected to a main line, that is used to hold a train or track vehicle to allow other rail traffic to cross or pass.

Everywhere within 3m horizontally from the nearest rail, and any distance above or below this 3m, unless a safe place exists or has been created. Incident requiring urgent action. Gas laws worksheet answers chemistry The incident might involve death or serious injury, health or safety effects, significant damage to property or infrastructure, significant train service disruption, or environmental impact. A device, including tail lights, fitted to the trailing end of the last vehicle of a rail traffic consist to indicate the end of the consist.

A metal staff located at the ends of a section, and interlocked with signals’ circuits. Electricity in the body symptoms Also known as half-pilot-staff.

Electricity units of measurement Two half-staffs can be joined to provide a pilot staff for the section. White lights fitted at the front of rail traffic to provide visibility for the rail traffic crew and to improve the visibility of rail traffic.

A signal indication that is inconsistent with the signal aspects and indications used in the Sydney Train’s Network, or the indications of adjoining signals and the known condition of the line, or what is known about occupancy of the line. To give or send copies of authorities, warnings, notices and Network publications to affected Competent Workers by voice, hand delivery or electronic means. An internally powered tool or device that can be easily carried by one person and be immediately removed from the track. Gas pains 6 weeks pregnant The tool must not have potential to distract the operator, or impede the ability of the operator to respond to the warning of approaching rail traffic.

A tool that can be carried and easily removed by one person and is not powered by compressed air, gas, electricity, hydraulics, explosive charge or an internal combustion engine. It defines the location to which rail traffic may travel under a Proceed Authority or the limits of a work on track authority. Mp electricity bill payment online bhopal The limit may be defined by a sign, a signal capable of displaying a STOP indication, or a specific kilometrage point on a line.

The maximum height and width to which rail vehicles can be loaded for a particular line, as prescribed in the Train Operating Conditions (TOC) manual. A Competent Worker responsible for keeping watch for approaching rail traffic, and for warning other workers to stand clear of the line before the trail traffic arrives. An incident assessed by Sydney Trains or delegate as having a potentially major impact on the Network, human life, property or the environment.

Generally permanent level crossings provided at authorised locations for Network maintenance. Electricity notes Excludes public level crossings and private level crossings. A Competent Worker who authorises, and may issue, Occupancy Authorities, and who manages rail traffic paths to ensure safe and efficient transit of rail traffic in the Network.

The Competent Worker may be known as a Train Controller for an unattended location, a Signaller for an attended location, or a delegate carrying out some functions of a Train Controller or Signaller. Procedures issued by Sydney Trains for the safe conduct of work on the Sydney Trains Network. 5 gases in the atmosphere To be read in conjunction with the Network Rules.

Road and pedestrian level crossing warning equipment that relies on road users and pedestrians looking out for and giving way to rail traffic. Closure of one or more lines to allow work to be carried out in the Danger Zone using a Local Possession Authority (LPA) or a Track Occupancy Authority (TOA). The Competent Worker responsible for coordinating protection of worksites under a Local Possession Authority (LPA). Gas x tablets himalaya See also Protection Officer. The means used to prevent rail traffic from entering a worksite or other portion of track, or to prevent road or pedestrian traffic from entering a level crossing. To connect 1500V overhead wiring supply to the traction return rail to ensure the immediate discharge of electricity if the 1500V overhead wiring becomes live.

A person qualified as Rail Commander that has been appointed by the Shift Manager RMC to liaise with Emergency Services and manage the rail industry response at an incident site. The land on which railway is built; comprising all property between property fences, or if f there are no fences, everywhere within 15m of the outermost rails. A running line in double-line territory, with entry and exit ends connected to a main line, that is used to hold rail traffic to allow other rail traffic to cross or pass.

To prevent movement of rail traffic with signals, signalling equipment, blocking facilities, or issue of a Condition Affecting the Network (CAN) form as a warning. Restricted speed is a speed that allows rail traffic to stop short of an obstruction within half the distance of clear line that is visible ahead.

An authorised notice distributed to give advice in addition to that provided in the published Sydney Trains Network Rules, Sydney Trains Network Procedures or Sydney Trains Network Local Appendices. The line between the departure-end yard limit of one location and the arrival-end yard limit of another location. Power per kwh A section consists of one or more blocks.

A Competent Worker who issues Occupancy Authorities, and works points, signals and other signalling equipment to manage routes for safe and efficient transit of rail traffic in the Sydney Trains Network. The lead agency officer or multi agency response police officer appointed by and subject to the direction of an Emergency Operations Controller. A place (including substations, traction substations, transformer rooms, switch rooms, sectioning huts, pole-mounted or pad-mounted transformers) containing high-voltage electrical equipment. The minimum time needed for workers to react to a Lookout’s warning and move themselves and equipment to a safe place; should include time for the Lookout’s reaction and a margin for safety.

An integrated system of operating procedures and engineered systems used in the Sydney Trains Network, for safe operation of rail traffic, and protection of people and property. Gas stations in texas Includes Electric Staff and Rail Vehicle Detection. A signal before a steeply rising grade, with a sign that directs rail traffic crews of prescribed trains, the sign may be before or fitted to the signal.

An electric circuit where current is carried through the rails and used to detect the presence of trains. Electricity for dummies pdf Track-circuits are used in the operation and control of points and signalling equipment. A Competent Worker who authorises, and may issue, Occupancy Authorities, and who manages rail traffic paths to ensure safe and efficient transit of rail traffic in the Sydney Trains Network. A manual issued by Sydney Trains that prescribes the minimum operating requirements for trains and track vehicles in the Sydney Trains Network.

A book used in signal boxes, staff huts or at block posts to record information about the condition of the line or the movement of rail traffic. To work to a suitable yard, service depot, siding or location where rolling stock can leave the running line for repair or replacement of vehicle equipment. Site: https://railsafe.org.au/glossary