How to add usb 3.0 ports to your pc gas and water socialism


Trying to get these rudimentary RS-232 connections to work properly was a delicate mixture of science, art and prayer. The cable pin-outs varied depending upon whether you were connecting a Data Terminal Device (DTE) or a Data Communications Device (DCE). You also had to make sure the connectors were the right gender (male or female) and had the correct number of pins (either 9 or 25).

Finally, once the hardware connection was in place and correct, you had to make a number of software settings such as 8 data bits vs. 7 bits, baud rate (communication speed), and parity or no parity. It was a confusing mess, and if one setting was incorrect the communications between computer and peripheral would be garbled, rendering the device effectively useless.

The introduction of USB 1.0 in January 1998 changed all of that. Instead of having to pull all of your hair out while messing with cables, connectors and settings, you just plugged a standard cable into standard connectors and installed the software from a CD.

Better still, the maximum speed at which data could be transferred via a USB 1.0 connection was lightning fast compared to RS-232. And with the introduction of USB 2.0 in April 2000, that already blazing maximum speed was increased by a factor of 40. And now that USB 3.0 is here we can transfer data at a dazzling rate of 10 times the speed of USB 2.0!

Many computers in use today are still equipped with USB 2.0 ports, not the new USB 3.0. Even worse, some of the “new” computers being sold today still come equipped with USB 2.0 ports. This means that while that brand new USB 3.0 external hard drive you just bought will work just fine with your PC, it will only work at the much slower USB 2.0 speed.

If your PC is a desktop machine it will need an empty PCI Express (PCIe) slot into which you can plug in a USB 3.0 adapter card with either 2 or 4 USB 3.0 ports. You can easily find out if your computer has an empty PCIe slot by paying a visit to Google and searching for your computer’s brand and model number along with the word “specs”.

For example, I would type “Gateway DX4860-UB20P specs” into the search box without the quotes and press the Enter key. A number of sites would pop up in the search results listing the specifications for the PC in question, including the type and number of empty expansion slots.

If all else fails you can simply carry your PC into your nearest computer store and ask them to check on your behalf. Regardless of which way you go about it, if you’re able to determine that your computer has an empty PCIe slot you’re good to go!

You can purchase a 2 or 4 port USB 3.0 PCIe expansion card at most any electronics or computer store, but I suggest you save some money and choose a card from the excellent selection at Amazon . You can easily install the card yourself or pay your neighborhood computer pro (usually the teenager down the street) to install it for you.

If your PC happens to be a laptop you won’t be able to install an internal USB 3.0 card. Instead, you’ll need to plug in an external USB 3.0 Express Card adapter. Unfortunately, if your laptop is an older model with a PC Card connector instead of an Express Card connector you won’t be able to upgrade to USB 3.0.