Osha paper mill worker’s death ‘preventable’ news news-shield.com gas bubble

###########

“Workers at the Clearwater Paper mill were exposed to dangerous machine hazards on a daily basis because their employer failed to properly prevent contact with operating machinery,” said Mark Hysell, OSHA’s area director in Eau Claire. “This man’s death is tragic and was preventable. gas explosion in texas Despite incidents like this one, machine hazards continue to be one of the most frequently cited federal worker safety violations. electricity calculator It takes just minutes to stop and put safety first.”

In a violation listed as serious, OSHA states, open-sided floors and or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards. gas x directions At the wet lap machine, on or about Oct. 23, a means of fall protection was not provided for open sides on work surfaces elevated greater than four feet above the lower level.

In a violation listed as serious, OSHA states, the employer did not ensure that the main power disconnect switch or valve, or both, controlling its source of power or flow of material, was locked out or blocked off with padlock, blank flange, or similar device before conducting any maintenance, inspection, cleaning, adjusting, or servicing of equipment that required entrance into or close contact with the machinery or equipment. electricity in indian states In the facility, during the time period last year from Oct. 23 through Oct. 27, equipment was not de-energized and locked out prior to performing cleaning, clearing jams and servicing on equipment including, but not limited to cleaning and clearing jams on the wet lap machine; servicing, cleaning and clearing jams on the forward cleaners; and servicing and clearing jams on the course screen in the de-inking process.

In a violation listed as willful, the employer did not ensure that the main power disconnect switch or valve, or both, controlling its source of power or flow of material, was locked out or blocked off with padlock, blank flange, at similar device before conducting any maintenance, inspection, cleaning, adjusting, or servicing of equipment that required entrance into or close contact with the machinery or equipment. a level physics electricity equations In the facility, equipment was not de-energized and locked out prior to performing cleaning, clearing jams and servicing on equipment including, but not limited to cleaning and clearing jams on the disperger in the de-inking process and cleaning and clearing jams on the de-watering conveyor.

In a violation listed as repeat, the employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. r gas constant Throughout the facility, the employer was not performing energy control procedure audits at least annually to ensure the accuracy of the lockout tag-out procedure to include energy isolation and a review with employees and the person performing the audit.

The company has gone above the OSHA requirements and installed extensive additional machine guarding on the machine involved in Quinlan’s death to further enhance employee protection, according to Van Vleet. Every production and management employee has been thoroughly retrained on the company’s energy control safety procedures in the entire facility, and all employees have been re-evaluated to confirm their complete understanding of the company’s energy control safety procedures, he said.

Owned by Cellu Tissue-City Forest LLC, the Clearwater Paper Corp. operates the Ladysmith mill. The mill employs about 81 workers and produces more than 40,000 tons of paper each year for use as paper towels, napkins, bath and facial tissue products. Based in Spokane, Washington, Clearwater is the country’s largest provider of private label tissue to retail grocery chains and a manufacturer of bleached paperboard. The company has an administrative office in Alpharetta, Georgia, and operates manufacturing facilities in Clarkson, Washington; Columbia City, Oregon Lewiston, Idaho; Las Vegas, Nevada; Oklahoma City, Oklahoma; Cypress Bend, Arkansas; Shelby, North Carolina; Elwood, Illinois; and Neenah, Wisconsin.