Outlast q8 log oil – 5 gal – free shipping – as low as $250 – log home preservatives electricity merit badge worksheet answers

Outlast® Q8 Log Oil is one coat oil based product that is a EPA registered wood preservative designed to protect against mold, mildew,rot and insects (termites, powder post beetles) on log homes and on wood siding. It provides maximum water repellency and sheer trans-oxide color with one coat coverage. Outlast Q8 Log Oil is a totally non-film forming EXTERIOR treatment that will never crack or peel. The solution penetrates into the wood to provide protection, not just on the surface, but also deep into the wood cell structure.

Looking to control that very common Carpenter Bee problem? Outlast® NBS30 will deter and inhibit insects from burrowing through or crawling on surfaces. NBS 30 Additive is effective in controlling crawling and nesting activity on painted or stained surfaces to which it has been added. Ants, cockroaches, beetles, mites, spiders, fleas, ticks, silverfish, dirt daubers, bees and wasps will not crawl on, nest on or burrow through coatings treated with NBS 30 Additive. Made from all natural ingredients 100% derived from EPA exempt plant oils. One additive bottle is good for 5 gallons.

Outlast® Mold-Buster ontains proven fungicide, IPBCU. This fungicide prevents growth of mold, mildew, algaese. This will extend the service life of coatings – less frequent cleaning needed. This product resists yellowing and will not affect the color or drying time. Use Mold-Buster when additional protection is required to control surface mold, mildew, and algae growth on the coating. It is recommended for use with coatings applied in high humidity environments and for applications where mildew has been a problem in the past. One additive bottle is good for 5 gallons.

Q8 Log Oil penetrates and protects. The surface must be porous free of mill glaze, dirt, and previous film coatings. Outlast Kleenstart is recommended prior to the initial application of Q8 Log Oil and subsequent applications. The better the preparation of the wood the longer the Q8 Log Oil treatment will last.

Wood preservatives do not protect against non wood eating insects. Ants, cockroaches, beetles, mites, spiders, fleas, ticks, silverfish, dirt daubers, bees and wasps will not crawl on, nest on or burrow through coatings treated with NBS 30 Additive.

Q8 Log Oil alone stops decay, mold, and fungi. Use Outlast Mold-Buster when additional protection is required to control surface mold, mildew, and algae growth on the coating. It is recommended for use with coatings applied in high humidity environments and for applications where mildew has been a problem in the past.

Outlast Q8 Log Oil can be applied during a wide range of weather conditions. Q8 Log Oil will not penetrate as well on wet or cold logs/wood. Below 50 degrees, Q8 Log Oil will become too thick to pump through a pump sprayer and may require hand brushing. Streaking of pigment may result if it rains within 36 hours of treatment. Simply re-spray the surface with more product, let it sit for 15 minutes and smooth out any streaks with a stiff paintbrush. Apply as much Q8 Log Oil as the wood will absorb. Clean tools with dish detergent and warm water or mineral spirits.

If applying a sealant after Q8 Log Oil wait for it to cure which is 2+ weeks prior to caulking/chinking. Curing time can vary with weather conditions. Q8 Log Oil can cure in 2 weeks with many warm and dry days. Low temperatures, humidity, and wet weather can lengthen the cure time.