Redrock 4×4 wrangler angry eyes headlight conversion – matte black j100733 (07-18 wrangler jk) – free shipping electricity flow direction

The RedRock 4×4 Angry Eyes Headlight Conversion is for those of you that have a 2007 and up JK, and are looking to give your Jeep a little bit of attitude and a lot more personality. This is going to be an inexpensive and easy-to-install stick-on part that will drastically change up the look of the front of your Jeep. And while there are other manufacturers out there that make a similar part, this is something that’s going to be very well built, so it’s gonna hold up well out in the elements.

These are made of an ABS plastic that is designed to be out in the weather. It’s an automotive grade product, so it’s not going to fade, crack, or otherwise wear out when it’s sitting out in the UV rays. This does come with 3M adhesive pre-applied on the back of it. All you need to do is peel the backing off and stick this on your headlight, making it a super easy install. Now, these will fit very well onto your factory headlight buckets, however, if you do have an aftermarket headlight bucket or a one-piece LED headlight, there’s a chance that they might not fit quite as nicely because the contour of that headlight might be a little bit different. Now, even though you can put these directly onto your factory headlight housings, they’re gonna fit really well. As you can tell, they are going to block some of the headlight output. Now, people don’t complain that it blocks enough to be a nuisance, however, those factory headlights aren’t all that great right out of the factory. So blocking the light could be a little bit of concern if you’re looking for the most out of your headlights.

This is definitely a very simple one out of three wrench install that shouldn’t take you more than 15 minutes to complete. Now, the most important thing to remember when installing anything with 3M adhesive, is that the surface you’re applying it to is very, very clean. This does come with an alcohol prep pad, so that’ll help you clean off the surface of the grill before installing these to ensure you get really good adhesion. The other thing to remember is to do this when the temperatures are moderate. Right around 70 degrees is optimal. That will ensure that the adhesive can set up properly, and that these will stay exactly where you put them for a good long time. You just don’t wanna do this when it’s very hot or very cold. The adhesive may have a little bit of trouble setting up.

The next step is going to be peeling off the 3M backing. Make sure that you have these aligned exactly how you want it. Then, just give it a little bit of pressure to ensure that the 3M makes good contact and adheres properly. Once you have these installed, it is gonna be a little bit difficult to pull them off and turn them or move them around, so, do ensure that you get them positioned in the right place before you apply pressure and do that final installation.

This set of angry eyes will run you right around $50, which in my opinion is a pretty fair price for the quality that you’re getting. You might be able to find some angry eye conversions out there that are a little bit less expensive, but in my opinion, the quality is going to be lacking a little bit there. And for me, a part that isn’t functional that is all form, all aesthetics like this, I don’t wanna spend a ton of money, so $50 is right in my price range. So if you’re looking for a well built angry eye conversion, I definitely recommend taking a look at this one from RedRock 4×4 that you can find right here at ExtremeTerrain.com.