Revision of astm f2413-18 standard specification for performance requirements for protective footwear sgs chapter 7 electricity and magnetism


Protective footwear requirements are referenced in the Occupational Safety and Health Administration’s (OSHA’s) Code of Federal Regulations (CFR) Title 29. bp gas locations General Personal Protective Equipment (PPE) requirements are given in section 1910.132 and Foot Protection requirements in section 1910.136. 29 CFR 1910.136(a) states each affected employee must wear protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects or objects piercing the sole or from an electrical hazard. The requirements are referenced in ASTM F2412 Standard Test Methods for Foot Protection and F2413 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear.

ASTM F2413-18 covers minimum requirements for the design, performance, testing and classification of protective footwear. Footwear certified as meeting ASTM F2413-18 must first meet the requirements of Section 5.1 Impact Resistant Footwear (I) and Section 5.2 Compression Resistant Footwear (C). o gosh corpus christi Then the requirements of additional sections such as Metatarsal protection (Mt), Conductive protection (Cd), Electric hazard protection (EH), Static dissipative protection (SD) and Puncture resistance (PR) can be met.

All footwear manufactured to the ASTM specification must be marked with the compliance to the specific portion of the standard. electricity merit badge worksheet answers One shoe of each pair must be clearly and legibly marked (stitched in, stamped on, pressure sensitive label, etc.) on the inside or outside surface of the tongue, gusset, shaft or quarter lining. The marking must be enclosed in a rectangular border and a four-line format is suggested.

SGS Global Softlines has an extensive network of over 40 laboratories worldwide, with a strong team of committed professionals from multi-disciplinary backgrounds. Our internationally accredited state-of-the-art testing laboratories offer a comprehensive range of physical, chemical and functional testing services for components, materials and finished products. grade 6 electricity worksheets We help your company ensure quality, performance and compliance with international, industrial and regulatory standards worldwide. Discover more at

Read more articles for the Consumer Goods and Retail industry! © SGS Group Management SA – 2018 – All rights reserved – SGS is a registered trademark of SGS Group Management SA. electricity bill saudi electricity company This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. electricity symbols worksheet Do not quote or refer any information herein without SGS’s prior written consent.