The line blurs between small cogen plants and large combined cycles 9gag instagram videos

##############

When U.S. President Jimmy Carter signed into law the Public Utility Regulatory Policies Act of 1978 (PURPA), he unintentionally ignited the worldwide deregulation of electricity markets, which in turn began a worldwide technology race between two distinct types of power plants: the newly created, industrial-scale plant that PURPA dubbed “cogeneration” and the traditional, utility-scale power plant known as “combined cycle.” Both types of plants teamed a gas turbine (GT) with a heat recovery c gastronomie plateaux repas steam generator (HRSG), but a very different GT-HRSG arrangement evolved for each plant. Let’s look at the evolution of each. Cogen Plants

The best match for most facilities was an aeroderivative-class GT. Derived from the engines powering passenger jets, aeroderivative GTs were highly responsive, relatively small machines, generating from about 20 MW to 60 MW at the max of the class. The cogen plant designer then selected the HRSG that best matched the aeroderivative GT. The best match was often the small, single-pressure HRSG type, which used thin-walled components, and geometries allowing thermal expansion, to achieve a responsiveness akin gas hydrates to the aeroderivative GT. Combined Cycle Plants

The HRSG that best matched this larger frame-type GT was the larger and more efficient, multi-pressure type of HRSG (Figure 1). These HRSGs were known to be less responsive than the small, single-pressure HRSGs, but they were expected to operate in steady-state baseload duty, so designers figured this lack of responsiveness wasn’t a big problem. However, it became a big problem when market conditions forced these larger, multi-pressure HRSGs into cycling duty.

For example, dampers were installed in the exhaust stacks and the gas turbine inlets to thermally “bottle up” the HRSG during outages and reduce thermal transients. Another useful modification was the upgrade of entire heat-transfer modules, using a more-robust chromium steel and a tube-bundle geometry that allowed for expansion and contraction. With these changes, the technology race got la gas prices average super tight. The Best of Both Worlds

Electricity developers watched the race unfold and placed their business bets accordingly. Which team was going to win? Would it be the small GT/single-pressure HRSG or the large GT/multi-pressure HRSG? If it had been a boxing match instead of a race, we could have said it was a contest between a bantam-weight fighter and a big, bruising, heavyweight champ. The “Bantam Boy” had quickness going for him, but he was out matched in power and efficiency, while the “Combined Cycle Kid” had awesome power and efficiency, but was slow on his feet.

Now—four decades later—the contest between these two looks like it’s been decided. It’s not that one technology knocked the other out; it’s just that the distinction gastroparesis between the competitors has now blurred until its nearly invisible. Designers of cogen plants have adopted the best features of the combined cycles. And designers of combined cycle plants have adopted the best features of the cogens.

As mentioned above, the HRSGs in cogen plants were designed for fast response to a facility’s fluctuating thermal loads, so they featured thin-walled components, or even eliminated steam drums, which were called once-through steam generators (OTSGs). The OTSG was the most-responsive HRSG made, but it was commercially available only in small sizes (below the aero-class cap of 60 MW). In contrast to the drum-type HRSGs of combined cycles, the OTSGs of cogen plants didn’t have electricity and magnetism online games defined economizer, evaporator, and superheater sections, nor did they have steam drums or blowdown systems. By removing these thick-walled components, OTSGs reduced the damaging stresses from thermal transients.

These damaging stresses from thermal transients suddenly became important to combined cycle designers when market demands forced their plants to switch from baseload duty to cycling duty. As a result, combined cycle HRSG designers also started using thinner steam drums. This change started blurring the line between the two competing technologies.

San Gabriel’s revolutionary OTSG was supplied by NEM Energy, under contract to Siemens Energy, which supplied the frame-type GT for the project—an H-class unit (Figure 2). The Siemens H-class GT also exemplifies how combined cycle designers borrowed the best features from i have electricity in my body cogen designers. Rated at a whopping 375 MW, the Siemens H-class GT was touted as “the largest operating GT in the world” when it first came out. Surprisingly, this combined cycle, frame-type GT features an air-cooled hot gas path that gave it fast startup and ramp rates, similar to those of an aeroderivative GT. According to Siemens, this GT can go from zero to full load in less than 30 minutes.

When U.S. President Jimmy Carter signed into law the Public Utility Regulatory Policies Act of 1978 (PURPA), he unintentionally ignited the worldwide deregulation of electricity markets, which in turn began a worldwide technology race between two distinct types of power plants: the newly created, industrial-scale plant that PURPA dubbed “cogeneration” and the traditional, utility-scale power plant known as “combined cycle.” Both types of plants teamed a gas turbine (GT) with a heat recovery steam generator (HRSG), but a very different GT-HRSG arrangement evolved gas density problems for each plant. Let’s look at the evolution of each. Cogen Plants

The best match for most facilities was an aeroderivative-class GT. Derived from the engines powering passenger jets, aeroderivative GTs were highly responsive, relatively small machines, generating from about 20 MW to 60 MW at the max of the class. The cogen plant designer then selected the HRSG that best matched the aeroderivative GT. The best match was often the small, single-pressure HRSG type, which used thin-walled components, and geometries allowing thermal expansion, to achieve a responsiveness akin to the aeroderivative GT. Combined Cycle Plants

The HRSG that best matched this larger frame-type GT was the larger and more efficient, multi-pressure type of HRSG (Figure 1). These HRSGs were known to be less responsive than the small, single-pressure HRSGs, but they were expected to operate in steady-state baseload duty, so designers figured this lack of responsiveness wasn’t a big problem. However, it became a big problem when market conditions forced these larger, multi-pressure HRSGs into cycling duty.

For example, dampers were installed in the exhaust stacks and the gas turbine inlets to thermally “bottle up” the HRSG during outages and reduce thermal transients. Another useful modification was the upgrade of entire heat-transfer modules, using a more-robust chromium gas kush steel and a tube-bundle geometry that allowed for expansion and contraction. With these changes, the technology race got super tight. The Best of Both Worlds

Electricity developers watched the race unfold and placed their business bets accordingly. Which team was going to win? Would it be the small GT/single-pressure HRSG or the large GT/multi-pressure HRSG? If it had been a boxing match instead of a race, we could have said it was a contest between a bantam-weight fighter and a big 8 gases, bruising, heavyweight champ. The “Bantam Boy” had quickness going for him, but he was out matched in power and efficiency, while the “Combined Cycle Kid” had awesome power and efficiency, but was slow on his feet.

Now—four decades later—the contest between these two looks like it’s been decided. It’s not that one technology knocked the other out; it’s just that the distinction between the competitors has now blurred until its nearly invisible. Designers of cogen plants have adopted the best features of the combined cycles. And designers of combined cycle plants have adopted the best features of the cogens.

As mentioned above, the HRSGs in cogen plants were designed for fast response to a facility’s fluctuating thermal loads, so they featured thin-walled components gas youtube, or even eliminated steam drums, which were called once-through steam generators (OTSGs). The OTSG was the most-responsive HRSG made, but it was commercially available only in small sizes (below the aero-class cap of 60 MW). In contrast to the drum-type HRSGs of combined cycles, the OTSGs of cogen plants didn’t have defined economizer, evaporator, and superheater sections, nor did they have steam drums or blowdown systems. By removing these thick-walled components, OTSGs reduced the damaging stresses from thermal transients.

These damaging stresses from thermal transients suddenly became important to combined cycle designers when market demands forced their plants to switch from baseload duty to cycling duty electricity definition. As a result, combined cycle HRSG designers also started using thinner steam drums. This change started blurring the line between the two competing technologies.

San Gabriel’s revolutionary OTSG was supplied by NEM Energy, under contract to Siemens Energy, which supplied the frame-type GT for the project—an H-class unit (Figure 2). The Siemens H-class GT also exemplifies how combined cycle designers borrowed the best features from cogen designers. Rated at a whopping 375 MW, the Siemens H-class GT was touted as “the largest operating GT in the world” when it first came out. Surprisingly, this combined cycle, frame-type GT features an air-cooled hot gas path that gave it fast startup and ramp rates, similar to those of an aeroderivative GT. According to Siemens, this GT can go from zero to full load in less than 30 minutes.