Therabath paraffin products therabath model tb6 frequently asked questions electricity outage austin

###############

Why is the TB6 deeper than the old p gaskell model? What does this do for me? The Therabath Paraffin bath is made primarily for Thermotherapy, or heat therapy. The deeper tank (up to 25% deeper than previous models) allows for patients or users to immerse the hand or foot farther in to the wax and cover a larger area of the body. This allows for a larger area to receive the heat therapy. If therapy is not your reason for using the Therabath then the benefit is more applications (up to 15% more) before having to refill the unit.

Will the new anodized list of electricity usage by appliances aluminum tank need to be cleaned often? Cleaning your Therabath unit is determined by your environment and care when cleaning and preparing the area being immersed in the wax. The aluminum tank will not require more frequent cleaning than previous models. Strong chemicals or cleaning agents are unnecessary and should not be used at any time.

Why does the green (red for 220V units) light go on and off? The Therabath unit cycles on approximately 8 – 10 times per hour for a short period of time each cycle. This electricity 2014 is normal operation and does not indicate that the unit is not working properly. If the wax, after 8-10 hours, is not completely melted then this may indicate a problem with your unit.

Does the Therabath have an on/off switch, temperature dial or quick-melt cycle? No. To safely melt the paraffin, the Therabath will never run in a temperature range that is dangerous or that could burn the user. Because of the time it takes to safely melt paraffin, there is no on/off switch on the bath. Think of your Therabath as a refrigerator – just as you leave your refrigerator on and ready to use, leave your Therabath on too! In fact the Therabath is safer to run than your gasbuddy near me refrigerator!

Temperature-setting dials may allow the paraffin to physically melt faster, but it may be too hot to use for several hours (it actually has to cool down first!). Units that we have tested have gotten over 165 degrees F (140 degrees would likely burn and so this temperature is very dangerous). The Therabath never reaches above the average running temperature range of 128 to 132 degrees F.

I’ve seen some cheaper paraffin baths in stores. Are they the same as the Therabath static electricity definition science? The Therabath is proudly made to professional healthcare standards right here in the USA — but is available to everyone. We make sure each unit that leaves our factory is durable, reliable, and safe. We provide quality products and service because when you’re in pain, you want fast, dependable relief electricity outage houston tx. Please see our Comparing Paraffin Baths page, for a complete list of the qualities that make the Therabath the leading paraffin bath.

How often should I use the Therabath? The answer depends on you. Use it as often as necessary to relieve pain or moisturize skin. Some people find that paraffin treatments are especially effective in the morning to loosen up the hands for daily activities, and again in the evening to relieve pain before sleeping. Others use their baths less often. Try a few experiments to see what works best for you.

Why does the green (red for 220V units) light go on and off? The Therabath unit cycles on approximately 4 times per hour for a short period of time each cycle. This is normal operation and does not indicate that power outage houston zip code the unit is not working properly. If the wax, after 8-10 hours, is not completely melted then this may indicate a problem with your unit.

Does the Therabath have an on/off switch? Because of the time it takes to safely melt paraffin, there is no on/off switch on the bath gas national average 2009. Think of your Therabath as a refrigerator, except in reverse. Just as you leave your refrigerator on and ready to use, leave your Therabath on too! Because the Therabath is well constructed and has extra insulation, it is very economical and safe to operate and costs only pennies per day.

Are paraffin treatments sanitary? Yes, paraffin treatments are proven safe and sanitary when performed according to manufacturer gas efficient cars under 10000’s suggested guidelines. No documented instances of cross-contamination due to communal use of paraffin baths have been reported. Therabath paraffin is maintained at 130 degrees F and contains no water, so it is a very hostile environment for pathogens to survive. And when you dip, an instant barrier is formed between the skin and paraffin, so what is on your skin (including germs, dirt, etc) stays on your skin. The results of several lab studies supporting these statements are available on our Therabath Hygiene Page year 6 electricity worksheets.

What is the difference between paraffin wax and candle or canning wax that I can find in the craft store or grocery store? The critical physical property of each of these waxes is the “melt point” or the temperature at which the paraffin becomes a liquid. Paraffin wax used in therapy has a melt point of approximately 119-121 degrees F. Candle waxes can vary from soy wax and soy wax blends at 100 gas kinetic energy degrees, which allow for the oils to be used in massage, to higher melt paraffin waxes at 150-170 degrees. Canning wax used for preserving preserves or food is also 150-170 degrees. At approximately 140 degrees a person will be scorched when immersing in water; this temperature rises to 150 degrees when immersing in wax (because of the “glove” barrier). It is very dangerous to use paraffin waxes formulated for candles and canning, as the user is subject to a burn.