Waterbed – wikipedia wd gaster theme

##

Water beds are normally heated. Temperature is controlled via a thermostat and set to personal preference, but is most commonly average skin temperature, 30 °C or about 86 °F. A typical heating pad consumes 150–400 watts of power. Depending on insulation, bedding, temperature, use, and other factors, electricity usage may vary, significantly.

• Waveless Mattress: A waveless mattress is a type of mattress that contains many layers of fiber inserts and/or baffles to control the water motion and increase support. Frequently the better mattresses contain additional layers in the center third of the mattress called special lumbar support.

A form of waterbed was invented in the early 19th century by the Scottish physician Neil Arnott. Dr. Arnott’s Hydrostatic Bed was devised to prevent bedsores in invalids, and comprised a bath of water with a covering of rubber-impregnated canvas, on which lighter bedding was placed. Arnott didn’t patent it, permitting anyone to construct a bed to this design. [4] [5]

In 1871, a waterbed was in use in Elmira, New York, for "invalids". It was briefly mentioned by Mark Twain in his article " A New Beecher Church", which was published in The New York Times on 23 July 1871. Twain wrote: "In the infirmary will be kept one or two water-beds (for invalids whose pains will not allow them to be on a less yielding substance) and half a dozen reclining invalid-chairs on wheels. The water-beds and invalid-chairs at present belonging to the church are always in demand, and never out of service". Heinlein descriptions [ edit ]

I designed the waterbed during years as a bed patient in the middle thirties; a pump to control water level, side supports to permit one to float rather than simply lying on a not very soft water filled mattress. Thermostatic control of temperature, safety interfaces to avoid all possibility of electric shock, waterproof box to make a leak no more important than a leaky hot water bottle rather than a domestic disaster, calculation of floor loads (important!), internal rubber mattress and lighting, reading, and eating arrangements—an attempt to design the perfect hospital bed by one who had spent too damn much time in hospital beds.

The modern waterbed was created by Charles Prior Hall in 1968, while he was a design student at San Francisco State University in California. Hall originally wanted to make an innovative chair. His first prototype was a vinyl bag with 300 pounds (136 kg) of cornstarch, [7] Ultimately, he abandoned working on a chair, and settled on perfecting a bed. [8]

Hall was granted a patent on his waterbed, (#3,585,356) which he originally called "liquid support for human bodies." The patent came to trial in 1991 in Intex v. Hall /wbx. The Patent was upheld in court and Hall received a $4.8 million judgment for infringement. In 1971, he founded Innerspace Environments, a manufacturing and sales company which became the leading retailer of waterbeds in the United States, with 30 owned-and-operated stores. [9] Hall /wbx Received additional royalties from licensing. Some later lawsuits were dismissed because of latches.

Sales peaked in 1987 at 22% of the domestic mattress industry. [10] Although the waterbed was initially advertised for offering "undisturbed sleep", Hall admitted that "[customers] bought it for the sensual or the sexual part of it" and the sexual association advertising was highly effective in the 1970s and early 1980s. Henry Petroski of Duke University said the waterbed was "Not only was it the cool new gadget, but it emerged during a time when the culture embraced anything different, especially a product that embodied sexual liberation". [11] Advantages and disadvantages [ edit ] Regarding usage [ edit ]

The waterbed can be useful and comfortable for some and dangerous for others. The main feature of the waterbed found attractive is its form-fitting, pressure-minimizing nature. Not only is this a boon to those seeking mere comfort, but the removal of pressure from the spine can provide relief to those with back pain. [12] In addition, the distribution of weight can prevent bedsores among the paralytic and the comatose. [13] [14] However, the National Institute of Child Health and Human Development warns that the form-fitting nature of the water-bed poses a danger to infants, providing a possibility of asphyxiation. [15]

Another advantage of a waterbed is its easy cleaning. It is impossible for dirt and dead skin particles to penetrate the water mattress, which can then be wiped periodically with a cloth and vinyl cleaner. The cover over the mattress can be regularly washed—thus virtually eliminating house dust mites in the bed. Dust mites can trigger asthma, eczema, and allergies in people sensitive to them. Regarding non-use [ edit ]

First, since some hard-sided waterbeds are of different sizes than other mattresses, bed sheets are harder to find and come in fewer varieties. Soft-sided mattresses are conventionally sized to avoid this problem. [ citation needed] Second, moving a waterbed is a more difficult process than moving a normal bed; the water must be drained and the frame disassembled, then the frame must be reassembled, the mattress refilled with water, and the water heated for a potentially long period to get the new water to the correct temperature. And heating the bed can be costly: a waterbed consumes between 300 and 1500 kW·h/year (36-180 USD at 12c/kW·h, the US national average for residential energy), depending on the climate, bed size, and other factors. The energy usage can be decreased by about 60% with the use of a soft-sided waterbed. [16] The water itself can pose challenges: occasionally, water mattresses may leak. Plastic liners will reduce damage, but emptying, patching, refilling, and reheating it (and sleeping elsewhere until all this is completed) is an inconvenience. Contractual inconveniences [ edit ]

There can be contractual inconveniences; many apartment leases and home insurance policies restrict the use of "water-filled furniture" due to concerns about water damage to the dwelling due to accidental leakage as well as the stress on the floor. [ citation needed] See also [ edit ]